Funko Pop! Muppets 1 Review by Mike Boon

by Mike Boon

First, let me get this out of the way: I have a wee bit of an obsession with The Muppets. I also get a kick out of seeing them in non-traditional form, which is what first got me hooked on Vinylmation and why I even purchased the bizarre Pook-a-Looz Muppets.

I was excited when Funko announced the Pop! Vinyl Muppet figures and, overall, I’m not disappointed. Sure, there are some nagging issues with all of them, but they look smashing on my shelf. Word is that they are already working on a second wave and I cannot wait to see who they have coming up next (fingers crossed for Beaker and the Swedish Chef).

But first, let’s look at what we have available right now:

Great, reliable Kermit is perhaps the easiest Muppet to transition to another form. Slap his trademark eyes on anything and you’ll know exactly who it is. With this figure, Funko wisely moved away from their traditional black-eye look (more on that below) to stick with his usual peepers. The square head is unique and in-line with many of the others in the set. Small quibble: His eyes are nicely over sized for emphasis but could have sat a little higher on his head. Big quibble: I simply cannot get my Kermit to stand up. Which means he’ll always be leaning on the back of the shelf instead of out front where he belongs.

Let’s just ignore the fact that they spelled his name as “FOZZY” on the side of the box (product shot above is from Funko and not Mike’s box) and focus on the figure itself. Overall, I like the design. Great depiction of his hat and tie, plus he has a slightly raised eyebrow that works well with his character. The square head and tilted ears go well when paired with Kermit. Mixed feelings on the black eyes though. I realize this is part of the usual Funko design but the purple eyelids draw a bit too much attention. Could be worse though (see next).

Piggy is one of the most difficult Muppets to reinterpret and this design, much like Muppets Vinylmation Series 1, certainly doesn’t argue the fact. Her mouth and nose are a nice proportion, but her eyes really hurt the character. If you are going to remove Piggy’s trademark blue irises for black Little Orphan Annie eyes, you should at least put a little more shape into her eyelids. Tilting each slightly or adding some roundness (as on Fozzie) would have likely made her seem more friendly. Plus, her ears are too long and too far back on her head. Purists will no doubt balk that her gloves are red instead of purple, but the Marilyn Monroe-type pose is the best thing going here.

Definitely one of my favorites of the bunch and not just because I can actually – shockingly – purchase a Mahna Mahna figure in 2012 (the character goes back to a 1969 appearance on The Ed Sullivan Show). He stands well, his hair is a lot of fun and since his eyes are traditionally black, no “empty soul” issues here.

Also a big fan of this one as it goes very well when paired with Mahna Mahna on the shelf (and who would want a “Mahna Mahna” without a “do doo do doo doo”). The squareness to the head is appropriate and subtle. The designers opted for pupils with this one, which is highly appreciated. Black eyes would have looked very odd with the black mouth. Only issue: You may need to spring for two.

The details on the body here really work well, particularly the tiny drumsticks in his hands and the broken chain around his neck. The black eyes don’t look too bad here, especially since he’s always been wild and this adds a little edge to the often cuddly character. His eyebrows are nicely stylized too, but it would have been nice to see a little definition between where the eyes end and the eyebrows start. Oddly, Animal is missing the more pronounced square shape to the head as seen on the others.

Like Piggy, Gonzo also has a tendency to go very very wrong. The designers got many details right (three fingers, purple tux, crook in the nose), but his square head is too pronounced, he is missing a tongue and his eyes are all wrong. Gonzo’s eyes are supposed to pop out rather than sit flat on the face, plus they are too small and with too much space between then (they should touch in the middle). I’m all for different designs, but it all seems a little too “Zombie Gonzo”.

A real treat and hopefully a sign of more Electric Mayhem members with the second wave. I really dig the lopsided hat, the feather, the round body design and the detailed outfit (even if he is missing his rings). The wide smile and prominent nose look great. Also, Teeth has the best looking black eyes of the bunch. They almost look like dark shades, which just makes him seem that much cooler. Based on this design, Zoot, Floyd and Janice would look fantastic as Pop! Figures.

For past posts from Mike Boon click here
You can also check Mike out at his own blog: baboondesign.blogspot.com

VM Speculation with Mike Boon: Dolly and Mr. Pricklepants

For the second day, we’d like to take a look at two characters from Toy Story 3. Thanks again to Mike Boon for such wonderful artwork!

  Dolly
Toy Story 3 (2010)
Voiced by: Bonnie Hunt
This sassy rag doll didn’t have a major role in Toy Story 3 but will no doubt be seen in future efforts (such as the Toy Story toons, books, merchandizing and more) considering how she is one of Bonnie’s toys. Plus, she’s cute.
  Mr. Pricklepants
Toy Story 3 (2010)
Voiced by: Timothy Dalton
Like Dolly, Mr. Pricklepants – a thespian with a love of lederhosen – had a relatively minor role in Toy Story 3 but will be part of the Toy Story crew for years to come. His entire back would be covered in his “prickles”.

“This figure looks great, especially with the hair filling up Mickey’s head.” – M.C.

Mike Boon joins us every day this week with his speculation of a Toy Story 2 Series vinylmation. For past posts click here. You can also check Mike out at his own blog: baboondesign.blogspot.com

VM Speculation with Mike Boon: Slinky Dog and Prospector Pete

Today we’re taking a look at two of the most famously voiced characters from the franchise. Good old Earnest and Frasier. Thanks again to Mike Boon for such wonderful artwork!

  Slinky Dog
Toy Story (1995)
Originally voiced by: Jim Varney (Toy Story)

Like the Potato Heads, licensing issues likely got in the way of having Slinky appear in Toy Story Series 1. But considering his prominence in the series, that’s a wrong that would need to be righted. I pictured the body component to be clear, with the slinky coils stretching around his midsection.

  Stinky Pete the Prospector
Toy Story 2 (1999)
Voiced by: Kelsey Grammer

The crafty and deceitful villain in Toy Story 2 can participate in all sorts of adventures with Woody, Jessie and Bullseye from Series 1. I tried to stick to the limitations of the mould, but this would obviously look great with a hat accessory and/or a pick-axe.

Mike Boon joins us every day this week with his speculation of a Toy Story Series 2 vinylmation. For past posts click here. You can also check Mike out at his own blog: baboondesign.blogspot.com

Vinylmation Speculation with Mike Boon: Toy Story 2 Mr. and Mrs Potato Head

We’d like to welcome back Mike Boon for another series of Vinylmation Speculation. Last time we saw his thoughts and designs on future Muppets series. This week we’ll see his ideas for a second Toy Story vinylmation series. Each day this week we’ll see two new designs, ending on Saturday with a design he thinks will make a great chaser. As with last time, All these figures look great and we are proud to show them to the community. Thanks again to Mike Boon!

  Mr. Potato Head
Toy Story (1995)
Voiced by: Don Rickles
Licensing issues with Playskool no doubt put a damper on any attempts to include Mr. Potato Head with Series 1, but he would be a vital addition to a second series. The head of the figure and one ear could be clear plastic along with, perhaps, the feet. This could give the impression of his feet being just barely attached (as on the real Potato Head). The back could either show the inside of his little compartment (for example, his other eyes) or a different expression.
 
Mrs. Potato Head

Toy Story 2 (1999)
Voiced by: Estelle Harris
If you are going to include Mr, Mrs Potato Head makes for a terrific partner. She’s been designed to complement Mr. Potato Head on the shelf and could be approached in much the same way with options for clear plastic and a possible alternate expression on the back.

“I really like the use of the ears in these two. The contrast of Mr.’s Ears ear symbol with the heart in Mrs.’s is a very nice addition.” – M.C.

Mike Boon joins us every day this week with his speculation of a Toy Story 2 Series vinylmation. For past posts click here. You can also check Mike out at his own blog: baboondesign.blogspot.com

The Pixar Alphabet According to Mike Boon

It’s not Vinylmation, but artist Mike Boon has caught my eye with his latest work. Mike, who previously brought us the Muppets speculation articles complete with concept art, has put together an alphabet using Pixar characters. Take a look.

Find out more about this and other Mike Boon creations here.

First Opinions: Cutesations by Mike Boon

Contributor Mike Boon talks about Disney’s news blind box product, Cutesations. This plush mystery series released on Friday, January 6 at the Disney Store and online for $6.50 per box or $79.50 for set plus mushroom display. Read Mike’s review below and check them out here.


Did you love the Alice in Wonderland Vinylmations series but wish they were, well, a lot softer and more traditional in shape? You’re in luck because Disney is now offering a new 5″ plush series called Cutesations, now available at the Disney Store. Alice and the Wonderland gang make up the first Cutesations series, no doubt with more to follow.

These are a treat for rabid Alice fans. It’s nice to see Caterpillar, Tweedle Dee and Tweedle Dum in there along with the usual suspects (Alice, Cheshire Cat, Mad Hatter, the White Rabbit and the Queen of Hearts). The designs are cute, though I would expect some odd disfigurements on things like the Mad Hatter’s nose in such a small plush and the Queen should have looked a little less cheerful and more sinister.
Ultimately though, I do wonder about appeal of the series as a blind box offering without any suggestion of a chaser and unknown options for trading. If you really wanted whole series, you may as well splurge for the full set of 8 with mushroom pillow.

Mike Boon

An Alternate Concept for the Animation 2 Chaser by Mike Boon

Mike Boon’s Headless Horseman

Our friend Mike Boon (who you know from the cool Muppets 3 and 4 speculation art) has been working on a set of Sleeping Hallow custom Vinylmation. With the release of the Headless Horseman in the Animation 2 set, he felt it the appropriate to release his idea of what it should look like. What do you think? Do you like it more then the Disney version? Check out the whole thing, and his post about it at his site.

VM Speculation with Mike Boon: Babyface and Chaser

The last day of Mike’s Toy Story Series 2 speculation. We’d like to thank Mike again (for like the 7th time) for all the great artwork he allows us to post on our site. I hope you guys enjoyed this set, and if there is any other interesting set you think might be fun to see in the future, let us know!

  Babyface
Toy Story (1995)

The leader of Sid’s mutant toys in the first Toy Story, Babyface consists of a baby doll head atop a spider-like body made of an erector set. Though Big Baby in Toy Story Series 1 was a disappointment, I like the mix of dark and cute in this character design.

“Mike did a great job with the legs in this figure. This is what the robot chef should have looked like!”-M.C.

  Woody’s Roundup Woody
Toy Story 2 (1999)
Voiced by: Tom Hanks

I wanted to include either Buzz or Woody in this series. I thought about a Spanish Buzz, but the puppet Woody from the TV series Woody’s Roundup seemed like more of a treat. I tried to tie the design into the Woody from Series 1. This would be the chaser for the series.

“Prefect”-M.C.

Mike Boon joins us every day this week with his speculation of a Toy Story Series 2 vinylmation. For past posts click here. You can also check Mike out at his own blog: baboondesign.blogspot.com

VM Speculation with Mike Boon: Chunk and Peas-in-a-Pod

The penultimate post of Mike Boon’s Toy Story series 2. Everything has been so good so far. Today’s pieces are a little off the beaten path but Mike’s made them into great vinyl.

  Chunk
Toy Story 3 (2010)
Voiced by: Jack Angel

This rock-like toy starts off as one of Lotso’s henchman, but is reformed by the time the credits roll. His expression changes with the press of a special head spike. I thought this played really well with the Sunnyside Daycare logo. One side (the Sunnyside one) shows a smiling Chunk. The other side shows an Angry Chunk with a variation on the logo to play up the prison-like atmosphere of Sunnyside. My only concern with this is the size of it. It may actually make a better 9”.

  Peas-in-a-Pod
Toy Story 3 (2010)
Voiced by: Charlie Bright, Amber Kroner, and Brianna Maiwand

The most minor character I chose for this series, mostly because my daughter sleeps with her own Peas in a Pod every night but also because I was happy with the end result. The peas – Peatey, Peatrice and Peanelope – are shown peaking out of their pod.

Mike Boon joins us every day this week with his speculation of a Toy Story Series 2 vinylmation. For past posts click here. You can also check Mike out at his own blog: baboondesign.blogspot.com

VM Speculation with Mike Boon: Chuckles and Trixie

Today we’re going back and looking at some of the newer characters from Toy Story 3. Thanks again to Mike Boon for such wonderful artwork!

  Chuckles
Toy Story 3 (2010)
Voiced by: Bud Luckey
The perpetually dour Chuckles isn’t fond of Lotso’s scheme to turn Sunnyside into a prison. Eventually, Chuckles makes his way into the home of Bonnie (along with Andy’s other toys) and he finally smiles after seeing Bonnie has drawn him with a big grin on his face. Chuckles with a smile would make a great variant.

“Great variant ideas. They seem to be a standard in Vinylmation sets these days, so why not imagine them as part of future sets!”-M.C.

  Trixie
Toy Story 3 (2010)
Voiced by: Kristen Schaal
Rex’s dinosaur partner from Toy Story 3 – on-line name Velocistar237 – would look great with some real horns (Disney can use the same ones they used for Buttercup). If not, they could be painted on the ears.

“I love the idea of horns. If not three, then just the one on the nose!”-M.C.

Mike Boon joins us every day this week with his speculation of a Toy Story Series 2 vinylmation. For past posts click here. You can also check Mike out at his own blog: baboondesign.blogspot.com